Tag Archive for: Seeds germination

Last week we had the simple answer to the ‘up’ and ‘down’ of a seed – sowing wise. Again, do not worry about the position of the seeds when sowing. Due to gravitropism, the radicles will always go ‘down’ and the cotyledon leaf(ves) ‘up’.

For those willing to know more about this subject, theoretically we would be able to tell the up and down of a seed by ‘reading’ the few scars that remain on the seed coat during the seed formation (after fertilisation).

To explain more, a few botanical terms that may not be familiar to all will be used. For clarification I provide links to the excellent botany glossary developed on the Angiosperm Phylogeny Website from Missouri Botanical Garden.

I quote a paragraph from the introductory notes, because I think it should give us all a moment of meditation. Keep in mind that in nature nothing is ‘white & black’, there are endless variations to all situations.

Here we go.

On the seed coat we can identify 2 main scars: the micropyle and the hilum (in most species, but there are exceptions) that can be used to identify the ‘up’ and ‘down’ of a seed. In some cases we can also see a sort of ‘suture’ along the seed, called raphe, and various excrescences  like the caruncle, which is usually near the micropyle.

It is useful to know from what type of ovule the seed was formed.  For the vast majority of flowering plants the seeds are born from an anatropous ovule, so we will consider it as default. In this case, the micropyle is very close to the hilum.

Post-fertilization the micropyle remains as a small pore in the seed coat, which facilitates the entry of oxygen and water into the seed during germination. The radicle of the embryo will emerge through the micropyle.
So, by locating the micropyle on the seed surface, one would know which side is up and which one is down.
What’s simple in theory many times, it is not the same in practice. The micropyle doesn’t persist in all seeds, or it is impossible to see it with the naked eye. But the hilum is often a larger scar (at least on larger seeds), and we can search for it.

We can take Caulophyllum as an example, because for monitoring the embryo development I took many seeds images years ago.

*Also, keep in mind that for practical purposes sometimes we call various fruits ‘seeds’ (the achenes for examples). What we see in this case is the fruit surface not that of the seed coats.

In very rare cases the seeds are ‘born’ from an orthotropous (atropous) ovule. In this case the micropyle is on the same line, opposed to the hilum. A well-known species whose seeds are formed from such an ovule is Symplocarpus foetidus, the skunk cabbage. Same goes for Arisaema (and most of Araceae family).

The germination of skunk cabbage has intrigued me when I first observed it, because the radicle emerge almost at the same time or after with the shoots through the hilum. This has to do also with the fact that the seed embryo can have different sizes and positions in the seed: it can be straight, curved, convoluted and so on.

In the case of the skunk cabbage seeds, you would think there is no up and down at the beginning, but they figure it out soon after germination :-)

Without going into details, there are other sub-variants of the anatropous and orthotropus ovules; it is also worth noticing that in flowering plants most of the ovules are curved.

A simple example is the campylotropus ovule found in the legume family. In this case, the micropyle is almost touching the hilum (see Lespedeza germination).

 

So, in theory it looks good but imagine looking for the micropyle on a poppy seed :-) On the following plate, we can observe though that on the small seeds of Primula sieboldii, the micropyle/hilum area is visible.

A reminder about the SEEDs LIBRARY where those interested can try to locate, where possible, the micropyle/hilum area on various seeds.

1. Arisaema triphyllum (orthotropus ovule); From anatropus ovules 2. Amphicarpaea bracteata; 3. Disporum; 4. Streptopus  amplexifolius; 5. Chamaecytisus hirsutus (with caruncle); 6. Primula sieboldii.

We have a particular situation in the Liliaceae family where by looking at the seeds through a backlight, usually we can see the embryo; even more so after the seeds are imbibed with water. So, it is fairly easy to tell the ‘up’ and the ‘down’ (at pointed end).

Based on other images I have in my ‘germination library’, it looks like most times the root will emerge from the ‘pointed’ side of the seeds; however, not all seeds have such a side.

To conclude, sometimes we could tell the up and down of a seed by ‘reading’ the seed coat, especially for medium size and large seeds, but this is not always the case. From the point of view of sowing I don’t think it matters, even for larger seeds. In nature, no one arranges them when they fall on the ground.
A nice weekend to all. Enjoy the season of ten thousand flowers!

I know that seeds germination is in the mind of all gardeners in early spring.
So, I will try to answer a question someone recently directed (as a comment): “Does anybody know the orientation of the root vs plant ends on the seeds?”

Due to spam attacks, I have been trying to block the comments, because of the huge amount of time needed to sort through the junk for the ‘good’ ones. Somehow they are sneaking through anyway. The above question seemed to be from a legitimate IP address, so let’s have a look at it.

If the question was related to sowing, here’s a simple answer. No matter how you place the seeds in the pots they will find their way, down and up! The roots will always orient in a downward direction and the shoots upwards due to gravitropism. It will not affect the germination or the health of the seedlings. Exceptions may apply only in case of very large seeds (next time about the skunk cabbage germination case); when in doubt, place them sideways.

The easiest way to exemplify this is by looking at seeds germinated out of pots from my ‘germination library’. Notice the Gentiana lutea germinating seeds in a Petri dish positioning by themselves with the roots ‘down’ and the plumule ‘up’. Also, an old image of a Sanguinaria canadensis seedling (part) found in the plastic bag ‘hanging’ to a vermiculite particle. An even better illustration comes from a ‘piece’ of Stylophorum lasiocarpum seedlings grown together in vermiculite in the stratification bag. No one arranged or told them which side is ‘up’ and which is ‘down’.

A couple more images showing germinated seeds of Helleborus caucasicus and Podophyllum peltatum (Mayapple) in moist towel. 
I added a few explanatory notes (click to open the gallery): regardless of the the position the seeds, the radicles are always heading ‘down’ (meaning the ‘down’ of towel). The seeds who were not in the ideal position, start curving their radicle immediately to grow it in the ‘right direction’. This is one of the reasons I do not germinate seeds in moist towel anymore: the radicles get tangled easily in the towel and are very easy to break when taken out.

Next time we’ll talk a bit more ‘serious’ about this subject, with a recap of the plant ovules and the post-fertilization marks that can be ‘read’ on the seedcoat surface.  Maybe that will scare the spammers away ;-)

Meanwhile, Happy Easter to all celebrating with a message of peace, joy, hope and happiness!

There are so many interesting seeds-related subjects that sometimes it is hard to choose what to write, or the time is too short.

An email arrived yesterday saying:
“I thought I’d better drop you a line before I forget. Have been now been giving most of my north american seeds at least a week of moist and warm temps before chilling. Today, after less than a week of 65 to 70 degrees f I have 25 yellow asclepias germinated and now in cells. I have had such luck with Asclepias tuberosa that I have collected and germinated so I am not shocked but especially since these are the yellow form, I did not expect such germination.
Most impressive, Thank you, Regards Catherine”

My answer was, besides thank you and so on… that the very good germination at room temperature may be due to the ‘older’ seed lot from 2020. (Last year there were no fruits on the yellow Asclepias). Maybe others are also familiar with the knowledge that ‘older’ Asclepias seeds germinate better than fresh ones, which could be explained by the after-ripening (post-maturation) requirement.

I don’t know for sure of this is the reason; usually I recommend to sow Asclepias species in late fall/early winter because there are some which require a cold/moist stratification for good germination (A. exaltata for example). If they don’t, it doesn’t matter, they will germinate in late spring when it gets warm.

 In any case, it is a good time to discuss a bit about the AR.
First, what is this after-ripening? Some define after-ripening (AR) as “a time and environment regulated process occurring in the dry seed, which determines the germination potential of seeds”.

Very simple, I would say that after-ripening is a process through which dry seeds are ‘preparing’ themselves to get out of dormancy and germinate, if and when the right conditions arrive. The AR involves the loss of water content of the seeds up to certain point which naturally happens in nature after the seeds ripen and fall on the ground/remain in the dry fruits.

Not all dry seeds species require an after-ripening period. It is known for sure that many many grasses require AR, but otherwise we do not have a comprehensive list of species that require AR. I only know about Asclepias, Polygala, and various Brassicaceae species.

AR is a complex process during which various physiological and molecular mechanisms are taking place within the dry seeds. If for some reason AR is not complete, the seeds will not germinate even if they are placed in proper condition (water, light/dark…); instead they will remain dormant (eventually they will germinate, but give them time…).

It would be impossible to approximate the exact duration for AR I guess, considering it cannot be the same for all species. Usually seeds collected in the summer and kept dry at room temperature should have enough time for after-ripening until late fall/early winter.

It has been shown that increasing the temperature at which seeds are after-ripened generally increases the rate of dormancy loss, but on the other hand, at high temperatures, the seed viability loss accelerate. So, it is a give and take if we want to manipulate AR or store the seeds long-term.

Conclusion:

Just like many seeds require to be sown right away (those recalcitrant ones), others require a ‘quiet time’ by themselves :) in a dry state, to be ready for the germination.
For gardeners and small operations, after collecting the seeds it is best to let them dry in paper bags in the house until late fall (in contrast to putting them in the fridge right away!). Exception: fleshy fruits/seeds which need to be cleaned first.

And yes, the after ripening requirement could be another reason that sometimes we stare at an ‘empty’ sowing pot wondering what went wrong.

Not one boring minute when dealing with plants and seeds :)
*I am always happy to receive good/interesting germination updates about the seeds you received. If you have bad news, it is fine as well. Maybe we can figure what went wrong together.

Using giberellic acid as an aid in germination

More species are germinating and because it’s still cold outside it’s a good time to ‘blag’ a bit about the germination. Each individual seed is a little wonder in itself: it does contain the plant we want – only if we can make it germinate! What I don’t like when growing from seed is not the ‘un-germination’ but the incertitude of what happened – what went wrong? – bad seeds, bad soil mix, too deep, too cold, too dry, not enough light, too much light… Also toooo much information on the web now can make things even more confusing. Here I’ll talk only about what I personally do.

Glaucidium palmatum seed germination

Glaucidium palmatum seed germination

Quite a few species (the most desirable) require ‘special treatments’ for germination like: stratification (moist & cold), alternation of cold and warm periods, incantations, sanding, soaking in GA3, frustrations… you get the idea. If you cannot easily provide a cold and moist period, the treatment with GA3 (acid giberellic) works in some cases wonders. I really like the convenience of GA3, which eliminates some variables from the process.

 Aquilegia-canadensis-semi-double-form-seedlings


Aquilegia canadensis – semi-double flower form seedlings

There is no need to seed way ahead of time or get buried under endless small pots that will get lost in the sway of other spring garden jobs. If the seeds are viable, they’ll germinate; if not, at least you’ll know it wasn’t your ‘brown’ finger at fault. Good to know, however, that GA3 at inappropriate concentrations can also destroy the seeds or lead to poor quality seedlings.

 These are two methods I use:

 1. Keep seeds in their package in the fridge (dry storage). When time to sow, prepare a GA3 solution 500-1000 ppm, soak seeds until next day, plant them in pots, cover with a thin layer of mix – place under lights (or outside if you sow late spring).

 2. For the most recalcitrant – place the seeds into a moist paper towel inside a Ziploc bag, keep in the fridge (moist storage). When time to sow, squeeze the moist paper and add the GA3 solution over seeds, then keep until next day and then sow.

 Germination should occur in 1-2(3) weeks.

Most excited about Thalictrums I am trying this year: T. delavayi – a Chinese meadow rue, with large lilac-mauve flowers (petal-like sepals; the one I bought a couple of years ago was really small and didn’t make it) and T. isopyroides with a really tiny, steel blue foliage that can grow in full sun – would be good for a rockery (from Turkey, Iran, Syria, Altai Mts.).

Note: Aquilegia also prefer/require light for germination so you should cover them with a very fine layer of potting mix (in case you forget about this they’ll still germinate but much slower).